 |
|
|
UNI - SHIELD : (BITUMEN SILVER PAINT) |
UNIVER “UNI-SHIELD” is an anti-corrosive and waterproofing paint with Aluminum finish. ‘UNI-SHIELD’ is composed of oxidized Bitumen volatile solvents and specially prepared Aluminum powder.
|
‘UNI-SHIELD’ is used as protective coating on membrane and masonary, it is used as a preservative over bituminous waterproofing felts and fabrics for a visually pleasing finish and to reflect the sustained heat. |
|
'UNI-SHIELD’ can be applied over old painted surfaces without burning and scraping provided the old surface is not flaky or badly crocodiled. |
|
|
Prior to application of ‘UNI-SHIELD’ over bituminous felts loose dust is to be brushed off and surface must be dry. |
|
Sr.No. |
Parameter |
Specifications
|
1 |
Finish |
Smooth Uniform & Suitable for Brush |
2 |
Drying Time
|
Less than 6 hours |
3 |
Covering Capacity
|
Prepared Metal Surfaces 11-12 Sq.Met / Lit.
Bituminous Surfaces 10-11 Sq. Met / Lit.
|
4 |
Application |
By Brush |
5 |
Flash Point
|
Not below 40 C |
6 |
Volatile matter
|
48% |
7 |
Mass in Kg
|
1.08 Kg. / liter |
8 |
Water content
|
Nil |
‘UNISHIELD’ is to be stirred well before use and to be stirred from time to time to have the Aluminum well disposed for uniform finish. The container is to be stored in tight lid condition in a cool and dry place. ‘UNISHIELD’ is inflammable and should be kept and worked away form any naked flames. The brushes are to be washed with mineral oil followed by soap wash and dried after use. |
|
|
